VERSION 3.3.7301 Sound from pa4x to pa2x

Discussion about problems you may have with KORG PA Manager.
Post Reply
tenny_pa4x
Posts: 3
Joined: 13 Feb 2020, 08:47

VERSION 3.3.7301 Sound from pa4x to pa2x

Post by tenny_pa4x » 13 Feb 2020, 09:02

Hi,VERSION 3.3.7301 does not work properly,i am converting from pa4x to pa2x and all the sounds in pa2x are mute...can i restore my PA MANAGER to an older version?all the settings are good in pa2x,KMP are loaded i can hear them only in the sound recorder but in user sound are MUTE

Admin
Site Admin
Posts: 474
Joined: 23 Feb 2014, 11:44
Location: London, UK
Contact:

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by Admin » 15 Feb 2020, 14:20

Hi,

There is no MUTE option with the sounds. Do you mean the VOLUME of OSC LAYERS = 0 ?
Can you please upload 1 or 2 Sounds so that we can take a look at the issue?
Image

tenny_pa4x
Posts: 3
Joined: 13 Feb 2020, 08:47

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by tenny_pa4x » 17 Feb 2020, 17:41

Hi,my English is bad and I hope you understand,I know there is no Mute option,People that pay this money for PA MANAGER they know how to work with Korg Arranger.I have found the PROBLEM : After loadind the Sound into Pa2x I hear no sound in my speaker,because in MENU-AMP, the Amp LEVEL have the value =0
After converting I must take each Sound go to MENU Amp Level and set the Amp volume to 127 and I have many Sounds that have 16 OSC LAYERS

Admin
Site Admin
Posts: 474
Joined: 23 Feb 2014, 11:44
Location: London, UK
Contact:

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by Admin » 19 Feb 2020, 00:58

Just to confirm are we talking about Sounds that use ROM Samples?
Because those are set to 0 by default.

You can't be converting sounds from 4X to 2X that use ROM samples. The conversion works for RAM Custom User DrumSamples/Multisamples only.
Image

tenny_pa4x
Posts: 3
Joined: 13 Feb 2020, 08:47

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by tenny_pa4x » 19 Feb 2020, 07:17

Hi , I am talking about sounds that use RAM Samples ,the older version from PA MANAGER was ok.

Admin
Site Admin
Posts: 474
Joined: 23 Feb 2014, 11:44
Location: London, UK
Contact:

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by Admin » 20 Feb 2020, 17:11

Will confirm / test and get back.
Image

Admin
Site Admin
Posts: 474
Joined: 23 Feb 2014, 11:44
Location: London, UK
Contact:

Re: VERSION 3.3.7301 Sound from pa4x to pa2x

Post by Admin » 06 Mar 2020, 20:15

A new update has been released v3.37505 which should have fixed the issue.
Image

Post Reply